Vol. 2 No. 4 (2022): Ползуновский вестник

SECTION 2. CHEMICAL TECHNOLOGIES, MATERIALS SCIENCES, METALLURGY

• STUDY OF THE PROPERTIES AND STRUCTURE OF ALUMINUM MATRIX COMPOSITES REINFORCED WITH TIO2 PARTICLES EDN: HBKNTW

  Hamid M. Mahan, Sergey V. Konovalov, Irina A. Panchenko, Diana D. Pashkova

  • PDF (Русский)

• EFFECT OF LASER SURFACE MODIFICATION ON PHYSICO-MECHANICAL AND TRIBOLOGICAL PROPERTIES OF STAMPED STEEL EDN: HAAUYB

  Dmitriy I. Gavrilov, Alexey V. Zhdanov, Igor V. Belyaev

  14-18

  • PDF (Русский)

• PRODUCTION OF CELLULOSIC MATERIALS FROM PLANT BI-OPOLYMERS EDN: HJALKR

  Natalia Yu. Demidenko, Oksana N. Eremenko, Veronika V. Tarnopolskaya

  19-23

  • PDF (Русский)

• DEVELOPMENT OF THE COMPOSITION OF PERMANENT STICKING ADHESIVES EDN: MSQWWY

  Dolguyaana N. Sidorova, Natal’ya N. Mestnikova, Natalia N. Petrova, Nadezhda N. Lazareva, Aitalina A. Okhlopkova

  24-30

  • PDF (Русский)

• SMALL-PHASE NANOTHERMITES AND THE RELATIVE EXPLOSION FORCE OF AN Al/MoO3 MIXTURE WITH A FLUOROPOLYMER EDN: NFKCYF

  Vitaliy O. Popov, Vitaliy N. Komov, Valeriy V. Malykhin

  31-38

  • PDF (Русский)

• EVALUATION OF THE EFFICIENCY OF A SEPARATOR WITH COAXIALLY ARRANGED PIPES WHEN DEDUSTING GAS EMISSIONS AT DIFFERENT ANGLES OF OPENING RECTANGULAR SLOTS EDN: NVLQUK

  Vadim E. Zinurov, Ilyuza N. Nasyrova, IlnurN. Madyshev, Azat A. Galiev

  39-47

  • PDF (Русский)

• STUDY OF TOLUENE-CONTAINING RESIDUE FROM RECTIFICATION PROCESSING IN COKE PRODUCTION EDN: YUMCGW

  Anna P. Bannikova, Olga M. Gorelova, Yulia S. Lazutkina

  48-53

• PROMISING DIRECTIONS FOR DECARBONIZATION OFINDUSTRIAL PRODUCTION WITH A HIGH CARBON FOOTPRINT IN OUTPUT PRODUCTS EDN: ZBADAA

  Evgeniy N. Neverov, Igor А. Korotkiy, Pavel S. Korotkih, Nadezhda S. Golubeva

  54-65

  • PDF (Русский)

• ULTRASONIC TRANSDUCER WITH RADIALLY POSITIONED PIE-ZOCERAMIC PACKAGES

  Andrey V. Shalunov, Vladimir N. Khmelev, Victor A. Nesterov, Alexander S. Bochenkov

  66-76

  • PDF (Русский)

• DEVELOPMENT OF ORGANIC SOLVENT WASTE DISPOSAL TECHNOLOGY EDN: PNMRUV

  Yulia S. Lazutkina, Olga M. Gorelova

  77-83

  • PDF (Русский)

• DEVELOPMENT AND RESEARCH OF ULTRASONIC COAGULA-TOR BASED ON VORTEX ACOUSTIC FLOWS EDN: OVLXGO

  Andrey V Shalunov, Viktor A. Nesterov, Roman N. Golykh, Alexander S. Bochenkov, Roman S. Dorovskikh, Vladimir N. Khmelev

  84-92

  • PDF (Русский)

• DEVELOPMENT OF THE HEAVY MASTER-ALLOY FOR COMPACTED GRAPHITE IRON EDN: SBFXGF

  Ernest S. Zakirov, Alexey G. Panov

  93-98

  • PDF (Русский)

• STUDY OF THE STRUCTURE OF Al-Si, Mn-Fe-Co ALLOYS BY SCANNING ELECTRON MICROSCOPY EDN: HSGFBY

  Юлия Андреевна Шлярова, Vitaly V. Shlyarov, Irina A. Panchenko, Sergey V. Konovalov, Filipiev R. A.

  99-108

  • PDF (Русский)

• COMPARISON OF METHODS TO INCREASE ADHESION BETWEEN BUTADIENE ELASTOMER AND BASALT FABRIC EDN: HEHCAI

  Mikhail M. Kopyrin, Aital E. Markov, Afanasii A. Dyakonov , Sakhayana N. Danilova, Mikhail P. Lebedev , Aleksei G. Tuisov, Aitalina A. Okhlopkova, Nadezhda N. Lazareva , Anatoly K. Kychkin

  109-117

  • PDF (Русский)

• On the matter of obtaining the composite piezoelectric thick film coatings based on phosphate binders and PZT piezo ceramics

  Gleb A. Koshkin

  118-124

  • PDF (Русский)

• RESEARCH OF CRYSTAL LATTICE DISTORTION IN SOLID SO-LUTION OF ALUMINUM ALLOY D16 (AA2024) AFTER ANNEALING AND AGING

  Ekaterina O. Nosova, Alexander P. Amosov

  125-132

  • PDF (Русский)

• ON THE PROBLEM OF THE IDENTIFYING THE STRUCTURES OF AUSTEMPERED HIGH-SRTENGTH CASTIRONUSING PRODUCTION CONTROL METHODS PWWAXE

  Alexey G. Panov, Irina F. Shaekhova, Chulpan A. Gimazetdinova, Tatiana V. Sochenko

  133-140

  • PDF (Русский)

• STUDYING THE ACETYLATION PROCESSOF SULFATE LIGNIN IN THE “THIONYL CHLORIDE - TOLUENE - SULFURIC ACID” ENVIRONMENT YYMVPI

  Danil D. Efryushin, Aleksandr A. Beushev

  141-150

  • PDF (Русский)

• METAL NANOPOWDERS COMBUSTION IMAGING USING ILLUMINATION FROM PULSED AND CONTINUOUS WAVE LASERS QKMHCE

  Fedor A. Gubarev

  151-158

  • PDF (Русский)

• OXIDATION KINETICS OF AK7 ALUMINUM ALLOY AND COMPOSITE MATERIAL BASED ON ALUMINUM Al-Al2O3 («OXIDALLE») IN THE SOLID STATE PSTWCF

  Muminjon Mahmudzoda, Bakhtiyor B. Eshov , Izatullo N. Ganiev, Jamshed H. Jailoev, Firuz A. Rahimov

  159-165

  • PDF (Русский)

• Influence of heat treatment on alloys of the Al-Mg-Si system with an excess of silicon and small zirconium additives ZFEZAM

  Maksim A. Lapshov, Evgeniy V. Arishenskiy, Mikhail V. Solopayev, Sergey V. Konovalov

  166-176

  • PDF (Русский)

• RESEARCH ON THE DEPENDENCE OF THE PERFORMANCE PROPERTIES OF BOARD MATERIALS OF LARCH WOOD ONPRESSING CONDITIONS WANOWQ

  Natalia V. Koreneva, Olga S. Beusheva, Danil D. Efryushin

  177-183

  • PDF (Русский)

• EFFECT OF THE COMPONENT COMPOSITION ON THE IMPACT STRENGTH OF THE CURED POLYMATRIC BINDER NIYNWI

  Snezhana A. Khaperskikh, Elena S. Anan’eva

  184-192

  • PDF (Русский)

• DEVELOPMENT OF GAS BORIDING TECHNOLOGY IN SEALED VOLUMES DWPZQL

  Sergey G. Ivanov, Mikhail A. Guryev, Artur I. Augstkaln, Sergey A. Zemlyakov, Aleksey M. Guryev

  193-199

  • PDF (Русский)